LMB-250 木材压力机专门为木材和板材行业量身
定制。液压压缩捆扎系统设计便于维护和操作。顶
部和侧面压缩确保稳定、紧密的负载,在运输过程
中保持高张力。LMB-250 木材压榨机可轻松集成
到现有生产线中,以创建无缝包装系统。
LMB-250 木材压力机专门为木材和板材行业量身
定制。液压压缩捆扎系统设计便于维护和操作。顶
部和侧面压缩确保稳定、紧密的负载,在运输过程
中保持高张力。LMB-250 木材压榨机可轻松集成
到现有生产线中,以创建无缝包装系统。
Key Specs
Machine Dimensions
§58 " L x130 " W x131.5 " H
Approximate Shipping Weight
§10000 lbs
§Excluding optional bunk feeder and conveyors
Minimum Load Size
§32 " W x 15 " H
Maximum Load Size
§58 " H x 60 " W
Maximum Load Weight
§5000 lbs 6000 lbs
Electrical Requirements
§460 V /3 ph /60 Hz 40 A
Pneumatic Requirements
§3 cfm @ 80 psiControls
§Allen Bradley CompactLogix L24 PLC
§Allen Bradley PanelView Plus 600 monochrome Touch Panel§24V control system
§Current overload protection
§NEMA 4/12 control cabinet with quick disconnect
§Sick autoheight sensing photoeye with on/off mode
§Power on/off lockable switch and indicator light
§460VAC motors & variable frequency drives
§Allen BradleyPowerFlex 525
§Two emergency stop stations (1 on panel / 1 on platen)§Manual function for platen up/down and conveyor fwd/rev§Variable compression settings
§Intuitive alarms diagnostic on touch screen
§Machine and head cycle counters
§Reset function
§Strap track with under track allowing under pack strapping§2 fully adjustable strapping patterns
§Alarm beacon
§120 VAC outlet in control panel for service work
Strapping head
§GS41 HT strapping head
§Possibility to strap with polyester from 3/8" to 5/8" wide
§Consistently reproducible strap tensioning through an Allen Bradley Powerflex 70 VFD
§Tension control with motor torque monitoring via the drive
§Tension is adjustable on the HMI
§Consistently high seal efficiency
§Environmentally favorable sealing by vibration welding
§Separate drive section for high speed strap feeding and take up to achieve maximum tension levels
§Electronic strap circulation control
§Accurate tension alignment of the strap
§Precise and quick adjustment by automatic strap feeding unit
Strap dispenser
§Coils of strap with a core diameter of 16" can be fitted to these high speed dispensers, with pulley block accumulation
Structure
system and electrical brake
§An optional powered version available for jumbo coil
§Heavy duty folded sheet metal uprights with upper frame structurally integrated with base for greater stability
Top & Side compression
§Hydraulic compression pads for greater consistency and
reliability
§Compression controlled with pressure regulator on hydraulic units and pressure switch. Separate regulation for top and side compression
§Compression speed controlled by flow regulator on hydraulic unit
§Side compression using an oversized dual rack and pinion equalizer system
§Maximum compression up to 25 000 lbs
Safety Features
§Maintenance safety pin to block the platen in place. This pin, when inserted, activate a sensor preventing the machine
Conveyor
operation
§2 E-Stop mushroom type push buttons: 1 on control panel, and 1 on the platen
Technical Information
§The machine is provided with a manual including electro/mechanical schematics and drawings, maintenance
program and PLC program disk